TSMS-5/8RK
6
Rev. 07/05
Ph: 800-421-6511
www.picomacom.com
Operation and Controls
1. 24Vac / 1A:
Connect cable from wall adaptor.
2. ANT IN:
Connect the cable from an off-air antenna to this port.
3. 13V/22kHz:
Connect the 13Vdc 22 kHz output of a LNB to this port.
4. 18V/22kHz:
Connect the 18Vdc 22 kHz output of a LNB to this port.
5. 18V/0kHz:
Connect the 18Vdc 0kHz output of a LNB to this port.
6. 14V/0kHz:
Connect the 14Vdc 0kHz output of a LNB to this port.
7. OUT:
Connect a satellite receiver to this port. If an off-air antenna
is employed, insert a TSDM-2150 diplexer between the
OUT port and the receiver input.
8. Wall Adaptor Power Supply:
Insert the power cord into a 120Vac 60Hz wall receptacle.
Back Panel Control
