PICO MACOM, INC.
12500 Foothill Blvd. • Lakeview Terrace, CA 91342 • (818) 897-0028 • (800) 421-6511 • FAX (818) 834-7197
Front & Rear Panels
4
P A N E L S
1.
Power on LED:
Indicates power is on when lit.
2.
Video Modulation adjustment:
Used to set video modulation level.
3.
Video Modulation LED:
Indicates video over-modulation when lit.
4.
Audio Modulation adjustment:
Used to set audio modulation level.
(volume).
5.
Audio Modulation LED:
Indicates audio over-modulation when lit.
6.
A/V Ratio:
Used to set audio/video ratio
7.
Channel Selector*:
DIP switches for channel selection.
8.
RF Adjust:
Used to set output level.
9.
RF Out:
Output port to connect unit to distribution
system.
10
. I.F. Input:
Input from scrambling device or I.F.
output.
11.
I.F.Output:
To I.F. input or to scrambling device.
12.
Audio Input:
Accepts any baseband audio output
source such as a satellite receiver , VCR,
security camera or cable converter.
13.
Video Input:
Accepts any baseband video output
source such as a satellite receiver , VCR,
security camera or cable converter.
14.
Convenience Outlet:
Provides 120 Vac,
60Hz at 600 watts max.
15.
Power cable:
The three prong type power plug connects
to a 120 VAC, 60 Hz electrical output.
*
Note: The PM45 is not an agile modulator. When changing channels the output filter must be
retuned to the new channel. Also, retuning to a new channel is only possible within the band.
CH-
PM45
A
UDIO VIDEO MODULATOR
VIDEO
ADJUST
4
VIDEO
OVER
MOD.
AUDIO
ADJUST
AUDIO
OVER
MOD.
A/V
RATIO
RF
ADJUST
CHANNEL SELECTOR
1
2
4
6
5
3
7
8
10
12
13
15
14
VIDEO IN
117 VAC
60 Hz 35 W
600 W
MAX
IF OUT
IF IN
RF OUT
AUDIO IN
+ GND -
9
11
All manuals and user guides at all-guides.com
