PICO MACOM INC. 12500 Foothill Blvd. • Lakeview Terrace, CA 91342 • (818) 897-0028 • (800) 421-6511 • FAX (818) 834-7197
P A N E L S
1
.
Model Number:
Each model of the single channel amplifier
uses a common chassis. The frequency
band and the output power is identified in
the product model number.
2.
Power On LED:
Indicates power is on when lit.
3.
Output Test Monitor:
A -30 dB output test port is provided for
ease of system alignment.
4.
RF Gain, AGC:
The RF output level and the AGC threshold
are controlled from this potentiometer. A
description of the AGC function of the
amplifier is provided on page 4.
5.
Aural Level:
This tunable notch filter allows adjustment
in the level of the audio carrier.
6.
Input Test Monitor:
A -20 dB input test point is provided to
easily monitor the signal level originating
from the antenna.
7.
IN:
The signal originating from a broadband or
yagi antenna is connected at this F connector.
Refer to page 3 for information on antenna
selection and proper input levels.
8.
OUT:
The filter amplified signal is directly
available at this F connector.
9.
Thru:
The outputs of other non-adjacent strip
amplifiers may be coupled through this F
connector.
10.
Convenience Outlet:
This outlet is provided to allow the chaining
of amplifiers in the head-end equipment
rack. The polarized AC outlet is capable of
delivering up to 250 watts of AC power.
11.
Power Cord:
This three prong polarized power cord is
approved by both UL and CSA for safe
operation of the amplifier. Do not cut the
ground terminal for both safety and
operational reasons. Connect to 108 to 125
VAC, 50/60 Hz electrical outlet.
6
F R O N T & R E A R P A N E L S
TEST OUTPUT
-30dB
AURAL
AURAL
LEVEL
CH-
3
4
5
TEST INPUT
-20dB
6
SINGLE CHANNEL AMPLIFIER
LBS
120VA
60HZ 10W
600VA MAX
+
+
+
+
+
+
+
THRU
IN
9
7
10
OUT
8
R.F. GAIN
AGC
2
1
All manuals and user guides at all-guides.com
