Page 7.48
BRIC
INTEGRATED PXI MATRIX SYSTEM WITH BIRST™ (40-562B)
pickering
SECTION 7 - MAINTENANCE INFORMATION
DAUGHTERCARD REMOVAL/REPLACEMENT
CAUTION
WHEN REMOVING DAUGHTERCARDS FROM THE CHASSIS IT IS IMPORTANT THAT THE FOLLOWING
PROCEDURE IS FOLLOWED.
Tools Required
•
Small Cross-Head Screwdriver
•
Bric Extraction Tool 44-999-001
Removal Procedure
NOTE
If blanking plates are fitted, remove these first. If more than one daughtercard is to be removed, remove the
daughtercard that is furthest to the LEFT, i.e. start removing daughtercards from the LEFT of the BRIC chas-
sis.
Release the four cross-head screws securing the BRIC chassis to the PXI chassis.
Push down the CPCI ejector handle and pull out the BRIC Chassis.
