Page 7.50
BRIC
INTEGRATED PXI MATRIX SYSTEM WITH BIRST™ (40-562B)
pickering
SECTION 7 - MAINTENANCE INFORMATION
Release the two securing screws to the front of both side panels.
(Note: On some earlier units complete removal of the side covers may be advisable to ease replacement)
Clip the removal tool over the daughtercard front panel connector.
Pull out the daughtercard.
To remove a Daughtercard from slots 3 to 12:
Remove the two cross-head screws securing the daughtercard to the BRIC Chassis.
Remove the two cross-head screws securing the adjacent left daughtercard to the BRIC Chassis.
Remove the two cross-head screws securing the front panels to both daughtercards and remove the front
panels from both.
Release the two securing screws to the front of both side panels.
Clip the removal tool over the daughtercard front panel connector.
Pull out the daughtercard.
