Bergfalke
Installing the fuselage servos
1. Install the rubber grommets and brass collets
into the elevator, rudder. Test fit the servos into the
servo tray. Trim the tray if necessary to fit your
servos.
2. Mount the servo to the tray using the mounting
screws provided with your radio system.
Rudder servo
Elevator servo
Rudder install as same as the way of aileron.
Please see pictures below:
5
150mm
Ball bearing
Rudder control horn and linkage install as same as
the way of aileron. Please see pictures below:
2. Push in
1. A+B Epoxy glue
Control horn
(not included)
nicht enthalten
Power Set for Bergfalke
available seperately
# C7089
Antriebsset Bergfalke
separat erhältlich
