02_04
Startinguptheengine (02_04)
The vehicle is fitted with automatic transmission with a regulator and centrifugal clutch.
Therefore always start the engine with the throttle at idle speed; to start-off from sta-
tionary position, progressively twist the throttle grip.
The vehicle is equipped with a fuel valve and a starter which switch on automatically
as soon as the engine is started.
In order to start the engine, it is necessary to pull either the rear brake lever «
B
» or
the front brake lever «
C
», before pressing the starting button, "
A
", so as to disengage
the safety switches.
1:
Put the scooter on its stand "
E
"; check that the rear wheel is off the ground.
2:
Keep the throttle closed.
3:
Insert the key into the ignition switch, "
D
", and turn to the
ON
position.
4:
Push the starter button «
A
» after pulling the rear brake lever «
B»
or the front brake
lever «
C
».
CAUTION
DO NOT CARRY OUT THESE OPERATIONS IN CLOSED AREAS SINCE EX-
HAUST GASES ARE TOXIC.
CAUTION
DUE TO THE HIGH TEMPERATURES THE CATALYTIC CONVERTER CAN
REACH, ALWAYS TAKE CARE, WHEN PARKING THE VEHICLE, THAT THE EX-
HAUST DOES NOT COME INTO CONTACT WITH FLAMMABLE MATERIALS, TO
AVOID SERIOUS BURNS.
22
2 Use
Summary of Contents for NRG Power DD
