PIAGGIO MP3 500 i.e. SPORT, Service Station Manual

Page: 243 / 432

- Check the rotor axial clearance using a rectified
bar as reference plane, as shown in the figure.
Characteristic
Limit value allowed:
0.1 mm
Refitting
- Make sure the gasket is in the correct position.
N.B.
THE TOOTH OF THE GASKET MUST BE IN ITS SEAT.
- Lubricate the internal rotors.
- Check there are no signs of scoring or wear on
the oil pump cover.
- If non-conforming values or signs of wear are
found, replace the pump.
- Fit the pump cover in the position that permits the
crankcase fixing screws to be aligned.
- Tighten the two fastening screws to the prescri-
bed torque.
Locking torques (N*m)
Oil pump cover screws
0.7 ÷ 0.9
- Insert the oil pump with gear
- Insert the 2 retaining screws through the slots on the gear and tighten to the prescribed torque.
N.B.
THE ASSEMBLY POSITION OF THE PUMP IS FIXED BY INSTALLATION OF THE SCREWS.
MP3 500 i.e. SPORT Business_LT_ ABS-ASR_EU_USA (2015)
Engine
ENG - 243