Moving
Occasionally you may need to move your gita
around a difficult obstacle, across the garage, or
into a tight parking place. In order to do so, always
place gita in Park so that you can freely push and
pull gita without the motors being engaged. (In
Ready and Follow modes gita’s motors will be
active and will resist your efforts.) Remember that
gita won’t self balance while in Park mode, so you
have to do the balancing yourself.
Lifting
gita weighs approximately 50 pounds. It is
designed to be lifted by two people. To lift gita,
first power it off. Then, remove the cargo bin. Next,
lift gita by reaching under the left and right hand
holds in the black plastic crown that runs around
its top section. The proper hand holds are
indicated by a sticker.
WARNING: Do not lift gita by the side flaps
that cover its wheels or from the wheel wells; if
you do so, you run the risk of injuring yourself
and of seriously damaging your gita. Damage
caused by improper lifting is not covered by your
gita warranty, so please use proper lifting
procedures.
Moving, lifting and transporting gita
20
