PIAB piPUMP 23, Manual

Page: 5 / 20

English
INTENDED USE
►
The product shall be used to evacuate air (non liquids) from a volume to create
vacuum for gripping, holding and processes
►
The product can be used to blow air for surface cleaning and to remove vacuum
from a volume
►
The product shall be used in environments within the product’s specifications and
certifications
►
The product shall be installed in accordance to installation instructions
►
The product shall be maintained in accordance to maintenance instructions
►
Troubleshooting shall be conducted in accordance to manual instructions
►
The safety instructions shall be followed
►
For professional use only.
MISUSE
►
Result from readily predictable human behavior.
►
The product shall not be used to evacuate liquids.
►
The product shall not be used to evacuate solid content without the use of filter.
►
The product shall not be used in a fully closed compartment (non ventilated) if not
exhaust is piped away.
►
The product shall not be used as stand alone safety system to fulfill international
►
lifting norms.
►
The exhaust shall not be restricted or blocked.
►
The vacuum and exhaust port shall not simultaneous be blocked when unit is
generating vacuum.
►
The product shall not be used to create vacuum or blow for other purposes than
the intended use.
►
Vacuum and exhaust air can cause severe injuries, keep hands, legs, hair and
eyes away from vacuum inlets and exhausts.
►
Do not install or operate you product if damaged.
►
Do not operate the product if compressed air line is not properly secured, loose
compressed air lines can cause severe injuries.
►
Using compressed air pressure and/or electrical voltage outside specification can
cause severe damage due to performance loss.
►
Blow-off functions or ejector exhaust shall not be used to pressurize sealed com
partments such as cylinders and/or tank-volumes.
pi PUMP 23
5