background image

-1-

PKI-0037-4

 

LP550/LP560

Installation Instructions

Thank you very much for purchasing PIAA product. 
Please read this entire manual before installation and use of this product.

Please read the cautionary points before installation to ensure safe utilization of the product.

● The lamp and  the switch harness are intended for automobile use. Do not use for any other purpose.

● This lamp is intended for use in rain (day or night), during foggy or snowy conditions where visibility is hampered. 
  Do not use during normal driving conditions.

● Do not operate the switch while driving.

● If the lamp is kept on when the engine is not running, it may drain the battery.

● Make sure the lamp is installed securely before driving the vehicle. If a problem is found, fi x it immediately.
● Check for any loose screws that hold the lamp in place before driving. If you fi nd any loose screws or bolts (if a bracket is 
  used), tighten them securely. If you notice a loose part while driving, inspect the section immediately and make the necessary 
  adjustments.

● Avoid repeatedly turning the lamp off  and on as it may reduce the overall life of the LED.

● Some vehicles produce a high voltage electric charge when the engine is started. Avoid loading extra voltage to lamps by
  turning the switch off  when you start engine.
● Avoid needless disassembly of the lamp or the switch harness as it may cause it to fail.

● If the lamp and/or the switch harness is removed and set aside for safekeeping, wipe away all dust or grime and store in a
  place free of moisture.

● If the lens is cracked or damaged in any way, verify whether there is any damage to the harness. If there is any damage to 
  the cord covering, replace it immediately.
● Avoid injury when replacing the harness and the switch harness. Please dispose of it as a non-combustible item.

※  The                and                  marks indicated in this manual are 

 

cautionary   points related to the installation of the product. 

 

To ensure safe and secure installation of the product, please follow these points closely.

 

To user 

…   Please keep this manual and a receipt with the name of the shop

 

 

 

where you bought it.

 

 

 

When giving this product to a third party, always include this manual 

 

 

 

together with the product.

 

To shop owners installing the product 

…  After installation of the product, make sure the customer is provided 

 

 

 

with this owner's manual.

● The lamp becomes very hot when turned on. When parking your car near fl ammable items such as dried leaves, turn off  the 
  lamp as it may cause a fi re.

● Do not look directly into the light for long periods. Doing so may cause eye irritation or visual impairment.

Summary of Contents for LP550









Reviews: