background image

-11-

PKI-0031

【7】PIAA LIMITED WARRANTY

With the exception of bulbs, PIAA Corporation, USA ("PIAA") warrants its products to be free from 
defects in workmanship and materials under normal use for as long as the original purchaser owns 
them.

 

EXCLUSIONS

This Limited Warranty specifically excludes defects resulting from misuse, abuse, neglect, alteration, 
modification, improper installation, unauthorized repairs, submersion, theft, vehicle crash, or by any 
other type of impact. Except for the Limited Warranty stated above, there are no warranties of PIAA 
products or any part thereof, whether express or implied.  Any implied warranty of merchantability 
or any warranty of fitness for a particular purpose is expressly disclaimed. Some states do not 
permit the disclaimer of implied warranties.

 

LENS CRACKS

Crash or impact damage is not covered. This can be determined by a chip or scrape on the lens or 
the housing. Stress cracks sometimes occur when the lens is subjected to sudden and extreme 
temperature changes. A stress crack has no chip or other sign of impact. Stress cracks are covered 
under warranty.

 

EXCLUSION OF DAMAGES

In no event shall PIAA be liable for any damages whatsoever (including, without limitation, 
consequential damages, incidental damages, or damages for loss of use, loss of business profits, 
business interruption, loss of business information, loss of time, inconvenience, or other losses) 
arising out of the use, misuse, or inability to use a PIAA product. PIAA reserves the right to change 
the design its products without any obligation to modify any previous product. This warranty gives 
you specific legal rights.  You may also have other rights that vary from state to state.

 

REPAIR AND REPLACEMENT

If a PIAA product is suspected of being defective, it must be submitted freight prepaid, to either an 
authorized dealer or distributor for warranty inspection. The receipt or other proof of purchase and 
a description of the problem must be included. The returned product will be inspected.  If the product 
is found to be defective and covered by this Limited Warranty, the sole remedy is repair or 
replacement, at PIAA's option. A repaired or replacement product will be shipped back at no charge, 
and will be warranted to be free from defects in workmanship and materials under normal use for 
as long as the original purchaser owns it. Removal, installation, or reinstallation costs are not 
covered by this Limited Warranty.

PIAA CORPORATION, USA

For assistance call 503-489-6666 or 1-800-525-7422

www.piaa.com

PIAA CORPORATION

www.piaa.co.jp

Summary of Contents for 2000 Back-Up












Reviews: