PI V-273, User Manual, Page: 9 / 49

2 Safety
V-273 VC Linear Actuator MP124E Version: 1.0.0 5
In this Chapter
Intended Use ................................................................................................................. 5
General Safety Instructions ........................................................................................... 5
Organizational Measures ............................................................................................... 6
2.1 Intended Use
The V-273 is a laboratory device as defined by DIN EN 61010-1. It is intended to be
used in interior spaces and in an environment which is free of dirt, oil, and lubricants.
The V-273 has a VC linear drive (p. 2), a position sensor and, depending on the
model, a force sensor as well. The V-273 is intended for positioning, adjusting and
shifting loads in one axis at various velocities and with defined forces.
The V-273 is a linear actuator for applications in automation or handling technology.
The V-273 is not intended for applications in areas in which a failure would present
severe risks to human beings or the environment.
The intended use of the V-273 is only possible when installed and in connection with a
suitable controller (p. 11). The controller is not included in the scope of delivery of the
V-273.
2.2 General Safety Instructions
The V-273 is built according to state-of-the-art technology and recognized safety
standards. Improper use can result in personal injury and/or damage to the V-273.

Only use the V-273 for its intended purpose, and only use it if it is in a good
working order.

Read the user manual.

Immediately eliminate any faults and malfunctions that are likely to affect
safety.
The operator is responsible for the correct installation and operation of the V-273.
2 Safety