PI P-753.11C, User Manual

Page: 9 / 49

2 Safety
P­753 Positioning Systems PZ254E Version: 1.0.1 5
In this Chapter
Intended Use .................................................................................................................................. 5
General Safety Instructions............................................................................................................ 5
Organizational Measures ............................................................................................................... 7
2.1 Intended Use
The P-753 is a laboratory device as defined by DIN EN 61010-1. It is intended to be used in
interior spaces and in an environment which is free of dirt, oil, and lubricants.
Based on its design and realization, the P-753 is intended for fine positioning as well as the fast
and precise motion of small objects. The motion takes place linearly in one axis.
The P-753 can be mounted with a horizontally or vertically oriented motion axis. Vertical
mounting is only possible under certain conditions (p. 18).
The intended use of the P-753 is only possible in combination with suitable electronics (p. 11)
that is available from PI. The electronics is not included in the scope of delivery of the P-753.
The electronics must provide the required operating voltages. To ensure proper performance of
the servo control system, the electronics must be able to read out and process the signals from
the capacitive sensors.
2.2 General Safety Instructions
The P-753 is built according to state-of-the-art technology and recognized safety standards.
Improper use can result in personal injury and/or damage to the P-753.

Only use the P-753 for its intended purpose, and only use it if it is in a good working
order.

Read the user manual.

Immediately eliminate any faults and malfunctions that are likely to affect safety.
The operator is responsible for the correct installation and operation of the P-753.
2 Safety