10 Technical Data
36
Version: 1.0.1
PZ254E
P753 Positioning Systems
P753.1CD
P753.2CD
P753.3CD
Unit Tolerance
Miscellaneous
Operating temperature
range
-20 to 80
-20 to 80
-20 to 80
°C
Material
Steel
Steel
Steel
Dimensions
44 mm ×
30 mm ×
15 mm
62 mm ×
30 mm ×
15 mm
80 mm ×
30 mm ×
15 mm
Mass
0.16
0.215
0.26
kg
±5 %
Cable length
1.5
1.5
1.5
m
±10 mm
Sensor / voltage
connection
D-sub 7W2
(m)
D-sub 7W2
(m)
D-sub 7W2
(m)
Recommended electronics E-625, E-754 E-625, E-754 E-625, E-754
The resolution of the system is limited only by the noise of the amplifier and the measuring
technology because PI piezo nanopositioning systems are free of friction.
Versions with LEMO connector available as P-753.x1C.
Vacuum versions to 10
-9
hPa available as P-753.xUD.
Nonmagnetic versions available as P-753.xND.
All specifications based on room temperature (22 °C ±3 °C).
10.1.2
Maximum Ratings
P-753 positioners are designed for the following operating data in continuous operation:
Positioner
Maximum operating
voltage
Maximum operating
frequency (no load)*
Maximum power
consumption**
P-753.11C
P-753.1CD
-20 to +120 V
1.9 kHz
5.4 W
P-753.21C
P-753.2CD
-20 to +120 V
1.25 kHz
10.8 W
P-753.31C
P-753.3CD
-20 to +120 V
1 kHz
16.2 W
* To prevent damage, it is recommended to operate the positioner with maximally one third of
the resonant frequency. If the positioner is operated with a load, the values are lower.
** Corresponds to the power provided by the amplifier, which results in heating of the piezo
actuator to approximately 80 °C.
