10 Technical Data
P-5x7/P-5x8 Positioners
PZ82E
Version: 3.2.0
45
10.4
Torque for Stainless Steel Screws (A2-70)
Screw size
Minimum torque
Maximum torque
M6
4 Nm
6 Nm
M5
2.5 Nm
3.5 Nm
M4
1.5 Nm
2.5 Nm
M3
0.8 Nm
1.1 Nm
M2.5
0.3 Nm
0.4 Nm
M2
0.15 Nm
0.2 Nm
M1.6
0.06 Nm
0.12 Nm
Pay attention to the screw-in depth required for the respective material according to
the VDI directive 2230.
10.5
Pin Assignment
D-sub 7W2 connector (m)
For P-5x8.ZCD only
Figure 12: D-sub 7W2 (m) connector: Front with connections
Pin
Signal
Function
A1 inner conductor Input
Piezo v
A2 inner conductor Output
Probe sensor signal
(immovable part of the capacitive sensor)
A2 outer conductor GND
Shield
1
Bidirectional
Data line for ID chip
2
GND
Shield of Target
Ground of ID chip when switched on
3
Input
Piezo voltage -
4
Vacant
–
5
Input
Target sensor signal
(movable part of the capacitive sensor)
