5 Installing
M-238 High-Load Linear Actuator
MP77E
Version: 1.1.0
13
5.3
Installing the M-238 into a Mechanical Mounting
INFORMATION
To achieve an optimal repeatability, the mounting shaft must not have any backlash.
When assembling, make sure that the actuator and the mechanical mounting have been
connected perfectly.
We recommend installing the actuator into the mounting with a clamp connection. The
following instructions refer to this case.
Clamp connection (schematic)
1.
Mechanical mounting
2.
Sleeve
3.
Mounting nut
4.
Mounting shaft with thread
5.
Pusher with tip
Requirements
You have read and understood the general notes on installation (p. 11).
You have provided your application with a suitable mounting for the mounting shaft of
the actuator (p. 12).
Tools and Accessories
Open-end wrench AF 41
Installing the Actuator
1.
Loosen the mounting nut on the mounting shaft of the actuator.
2.
Position the actuator in the mounting of your application.