background image

NOTICE

Protruding screw heads!

Protruding screw heads can damage the L-505.021212.

Make sure that the screw heads are fully countersunk and cannot interfere with motion.

NOTICE

Excessively long screws and locating pins

Screws and locating pins that are inserted too deeply can damage the L-505.021212.

Pay attention to the 

depth of the mounting and locating holes (p. 35)

 in the L-505.021212.

Only use screws and locating pins of the correct length for the respective mounting holes.

Mounting the L-505.021212 onto an Underlying Surface

1. If necessary: Allow access to the mounting holes in the base body of the L-505.021212.

Possible measures:

Temporary 

startup and operation of the positioner (p. 25)

 and commanding the

platform to a suitable position

Push the motion platform by hand (p. 27)

2. Align the L-505.021212 on underlying the surface so that the corresponding mounting

holes in the L-505.021212 and underlying surface are in line.

3. Tighten the screws in all accessible mounting holes completely.
4. If necessary: Repeat steps 1 to 3 for all concealed mounting holes.
5. Check that the L-505.021212 is fixed firmly to the underlying surface.

6.2

Connecting the L-505.021212 to the Protective Earth Conductor

It is only necessary to connect the L-505.021212' to the protective earth conductor when both
of the following conditions are met:

The load on the motion platform must be connected to the protective earth conductor, but
it is not possible to connect the protective earth conductor directly.

The load and the motion platform are connected conductively to each other.

Overview

Figure 5: Protective earth connector on the L-505.021212
1. Connector for the protective earth conductor on the L-505.021212, indicated by the

protective earth symbol

2. Safety washer
3. Flat washer
4. Protective earth conductor lug
5. Screw, ISO 7045 M4×8

6  INSTALLATION

L505M0015EN 

 3/18/2020

15

M O T I O N   |   P O S I T I O N I N G

Summary of Contents for L-505.021212











































Reviews: