6.4
Mounting the Load
NOTICE
Impermissibly high load on the L-412.xx9054
An impermissibly high load on the L-412.xx9054 impairs the motion and can damage the
L-412.xx9054.
►
Pay attention to the
maximum permissible forces (p. 32)
that may act on the
L-412.xx9054.
►
In the case of multi-axis systems, include the masses of the positioners to be moved
when calculating the load.
NOTICE
Excessively long screws and locating pins
Screws and locating pins that are inserted too deeply can damage the L-412.xx9054.
►
Pay attention to the depth of the mounting and locating holes.
►
Only use screws and locating pins of the correct length for the respective mounting holes.
Overview
Figure 9: Mounting the load onto the L-412.xx9054
Tools and Accessories
■
At least 3 screws with suitable
■
Suitable tool for tightening the screws
■
Optional: 2 suitably dimensioned dowel pins as locating pins for aligning the load on the
L-412.xx9054
Requirements
✓
You have read and understood the
general safety instructions (p. 8)
✓
You have mounted the L-412.xx9054
✓
The L-412.xx9054 is not connected to the electronics.
✓
You have prepared the load so that it can be fixed to the mounting holes in the motion
platform:
■
The gap between the center of gravity of the load and the center of the motion
platform is as small as possible in all directions.
6 INSTALLATION
L412UM0004EN
‒
10/24/2022
22
M O T I O N | P O S I T I O N I N G
