PI E-871.1A1N, User Manual, Page: 17 / 226

Communication interfaces
PC interfaces, via software (p. 17) or PI General Command Set:
TCP/IP
RS-232
USB
SPI
The interface parameters in the E-871.1A1N's nonvolatile memory can be queried with the
IFS? command and changed with the IFS command.
TCP/IP
E-871.1A1N's interface settings for TCP/IP communication:
Interface setting Factory setting Note
IP address format:
<IP address>:<port num-
ber>
(IPADR) 000.000.000.000:50
000 Is not used when an IP address is assigned
to the E-871.1A1N by a DHCP server (IP-
START = 1).
<port number> cannot be changed.
Subnet mask
(IPMASK) 24 Bit mask for subnet
Startup behavior for con-
figuring the IP address
for TCP/IP communica-
tion
(IPSTART) 0 0: The address defined by IPADR is used.
1: DHCP is used to get the E-871.1A1N's ad-
dress.
Gateway
(IPGTWAY) 000.000.000.000 Standard gateway for TCP/IP communica-
tion
MAC level address
(MACADR) Invariable, unique network hardware ad-
dress.
RS-232
E-871.1A1N's interface settings for RS-232 communication:
Interface setting Factory setting Note
Baud rate
(RSBAUD) 115200 Possible values: 9600, 19200, 38400, 115200
To establish communication successfully, the
baud rates of the E-871.1A1N and PC must
match.
4.6 Software Overview
The following table shows the PC software that is included in the product CD. The specified
operating systems stand for the following versions:
■
Windows: Versions 7, 8, 10 (32 Bit, 64 Bit)
■
Linux: Kernel 2.6, GTK 2.0, from glibc 2.15
4 PRODUCT DESCRIPTION PZ285EN
‒
1/30/2019
17
M O T I O N | P O S I T I O N I N G