Introduction
www.pi.ws
E-462 PZ210E Release 1.1.0
Page 4
DANGER—IMPROPER WIRING
Improper wiring of HIGH VOLTAGE connectors can cause death, injury
or damage. Modification of HIGH VOLTAGE connectors should only be
carried out by the manufacturer. Any unauthorized modification may
jeopardize operating personnel. Treat HIGH VOLTAGES and HIGH
CURRENTS with respect.
CAUTION
Exposing some PZTs to voltages too far outside their operating range
will destroy the active element in the actuator. Make sure that both the
polarity and the voltage as seen by the PZT are within the allowable
range.
Be especially vigilant regarding polarity when using older actuators,
adapter cables and controllers set up for non-standard voltage ranges.
CAUTION
Read this before operating the equipment covered in this manual.
Always keep the User Manual safe and close to the described device.
In case of loss or damage to the instructions, please order a new copy
from your PI distributor or download one from www.pi.ws
(http://www.pi.ws). Also keep and add all further information (e.g.
extended instructions or Technical Notes) to the User Manual.
1.4
Unpacking
Unpack the E-462 Piezo Amplifier with care. Compare the contents against
the items covered by the contract and against the packing list.
The following components are included:
E-462
Piezo amplifier as ordered
E-660.PS
Wall-plug power supply. With E-462.00 only.
PZ210
User manual for E-462
E500T0011
Technical Note for Analog Driver Set
Inspect the contents for signs of damage. If parts are missing or you notice
signs of damage, contact PI immediately.
Save all packing materials in case the product need be shipped again.
!
!