PZ300EK 1.0.0 08/2020. 1.0
M O T I O N | P O S I T I O N I N G
Securing the Electronics
When the electronics are to be used as a bench-
top device:
X
Make sure that the electronics are standing
safely and securely.
If the electronics are to be mounted:
1. Bore the required holes into the underlying
surface.
2. Insert a suitably sized screw into each
hole or recess and tighten to secure the
electronics.
Connecting the Electronics to the Pro
-
tective Earth Conductor
Requirements
✔
The electronics are switched off.
Tools and Accessories
▪
Suitable protective earth conductor:
▪
Cable cross section ≥0.75 mm²
▪
Contact resistance <0.1 Ω at 25 A at
all points relevant for attaching the
protective earth conductor
▪
Mounting hardware for the protective
earth conductor; is on the protective earth
connector on delivery of the electronics
▪
Suitable wrench
Connecting the Protective Earth Conductor
1. Attach a suitable cable lug to the protective
earth conductor.
2. Attach the cable lug to the protective earth
connector using the mounting hardware
supplied.
Connecting the Protective Earth Conductor
with a Threaded Bolt
1
Threaded bolt
2
Flat washer
3
Cable lug with protective earth conductor
4
Lock washer
5
Nut
Connecting the Electronics to the Power
Supply
NOTICE
Electronics with integrated power ad-
apter are factory set to the line voltage
customary in your country. It may be
necessary to install different line power
fuses to operate in other countries (see
manual).
Requirements
✔
The electronics are switched off.
✔
The power cord is not connected to the
power socket.
Tools and Accessories
▪
If necessary: Power adapter supplied
▪
If necessary: Adapter supplied for the pow-
er adapter connector
▪
Power cord supplied
Connecting the Power Adapter to the Electro
-
nics using the Cable Adapter
1. Connect the cable adapter to the power
adapter connector of the electronics.
2. Connect the power adapter to the cable
adapter.
3. Connect the power cord to the power
adapter.
Connecting the Power Adapter to the Electro
-
nics without Cable Adapter
1. Connect the power adapter to the power
adapter connector on the electronics.
2. Connect the power cord to the power
adapter.
Connecting the Power Cord Directly to the
Electronics
X
Connect the power cord to the power
socket on the electronics.
Function Test
If the electronics have a display, a function
test is recommended before a positioner is
connected.
Requirements
✔
The electronics are switched off.
✔
A positioner is not connected to the elec-
tronics