1
www.phywe.com, © All rights reserved
12670-00 / 3611
Operating instructions
Cobra4 Sensor-Unit Weather:
Humidity, air pressure, temperature, light intensity, altitude
12670-00
PHYWE Systeme GmbH & Co. KG
Robert-Bosch-Breite 10
D-37079 Göttingen
Phone
+49 (0) 551 604-0
Fax
+49 (0) 551 604-107
Fig: 12670-00 Cobra4 Sensor-Unit weather
The unit complies with
the corresponding EC
guidelines.
CONTENTS
1 SAFETY PRECAUTIONS
2 PURPOSE AND CHARACTERISTICS
3 FUNCTIONAL AND OPERATING ELEMENTS
3.1 Operating elements
3.2 Functional elements
4 NOTES ON OPERATION
5 HANDLING
5.1 Putting Cobra4 Sensor-Unit Weather into operation
5.2 Recording of weather data
6 TECHNICAL SPECIFICATIONS
7 PARTS SUPPLIED
8 NOTES ON THE GUARANTEE
9 WASTE DISPOSAL
1 SAFETY PRECAUTIONS
•
Carefully read these operating instructions completely
before operating this instrument. This is necessary to
avoid damage to it, as well as for user-safety.
•
Only use the instrument for the purpose for which it was
designed.
•
Only use the instrument in dry rooms in which there is no
risk of explosion.
•
Protect Cobra4 Sensor-Unit Weather from dust, moisture
and vapours. Use a slightly moist lint-free cloth to clean
the instrument. Do not use aggressive cleaning agents or
solvents.
•
Take care that no liquid penetrates in through the hous-
ing openings, as such penetration would result in dam-
age to Cobra4 Sensor-Unit Weather.
•
When using the instrument in the open air, do not allow
rainwater or splash water to enter into the housing.
•
Only use the experimental set-up for the purpose for
which it is intended.
•
Do not open up the instrument.
•
Only connect the data output of Cobra4 Sensor-Unit
Weather to the measured data recording instruments
specifically intended for it.
•
The present-day state of software development makes it
impossible to guarantee that a product is free of faults.
PHYWE Systeme GmbH & Co. KG therefore does not
take on any liability for damages that occur during the
installation or the use of the instrument.
