background image

 

 

 

 

 

 

 

www.phywe.com, © All rights reserved 

 

12973-00 / 1821

 

Operating instruc-
tions 

Cobra SMARTexperiment - 

3. Newton’s law 

 

12973-00 

 

PHYWE Systeme GmbH & Co. KG 
Robert-Bosch-Breite 10 
D

–37079 Göttingen 

 
Telefon 

+49 (0) 551 604–0 

Fax   

+49 (0) 551 604–107 

E-mail 

[email protected] 

Internet 

www.phywe.com 

 

 

 

The unit complies 
with the applicable 
EC-guidelines 
 

 

 

  

 

Fig. 1: 12973-00  Cobra SMARTexperiment - 

3. Newton’s law 

TABLE OF CONTENTS 

1

 

SAFETY PRECAUTIONS

 

2

 

PURPOSE AND CHARACTERISTICS

 

3

 

FUNCTIONAL AND OPERATING ELEMENTS

 

4

 

NOTES ON OPERATION

 

 

HANDLING

 

6

 

TECHNICAL DATA

 

7

 

SCOPE OF DELIVERY

 

8

 

ACCESSORIES

 

9    CONFORMITY

 

10

 

DISPOSAL

 

 

1  SAFETY PRECAUTIONS 

 

 

Carefully  read  these  operating  instructions  completely 
before  operating  this  instrument.  This  is  necessary  to 
avoid damage to it, as well as for user-safety. 

 

Use the unit only for its intended purpose 

 

Only use the instrument for the purpose for which it was 
designed. 

 

Do not open the unit. 

 

Protect  the  instrument from  dust,  moisture  and  vapours. 
Use a slightly moist lint-free cloth to clean the instrument. 
Do not use aggressive cleaning agents or solvents. 

2  PURPOSE AND CHARACTERISTICS 

With the Cobra SMARTexperiment "Newton's 3rd Law", New-
ton's 3rd Law -A force from body A on body B is always ac-
companied by an equal but opposite force from body B on 
body A - can be illustrated with a simple set-up. 

 

Caution! 

Summary of Contents for Cobra SMARTexperiment

Page 1: ...CCESSORIES 9 CONFORMITY 10 DISPOSAL 1 SAFETY PRECAUTIONS Carefully read these operating instructions completely before operating this instrument This is necessary to avoid damage to it as well as for user safety Use the unit only for its intended purpose Only use the instrument for the purpose for which it was designed Do not open the unit Protect the instrument from dust moisture and vapours Use ...

Page 2: ... 6 3 3 3 Replace the hooks 7 with the connectors required for the experiment Magnets 3 or two threaded rods 2 with a connecting nut 4 are available for this see 5 1 Experiment set up Caution Tighten the lock nuts on the hooks or threaded rods only slightly by hand Never use a tool This can lead to the destruction of the lock nuts 4 NOTES ON OPERATION This device fulfils all of the technical requir...

Page 3: ...o indicate that the connection has been estab lished correctly After the sensor has been coupled with the software the sensor is no longer visible to other users in the software and therefore can no longer be selected If the sensor is switched on and not connected it switches off automatically after 5 minutes Selection of the sensor via the USB interface For this purpose the sensor must be plugged...

Page 4: ...e returned to the local recycling sta tions PHYWE Systeme GmbH Co KG Abteilung Kundendienst Robert Bosch Breite 10 D 37079 Göttingen Telefon 49 0 551 604 274 Fax 49 0 551 604 246 Do not dispose of this product with normal household waste If this unit needs to be disposed of please return it to the address that is stated below for proper disposal PHYWE Systeme GmbH Co KG hereby declares that the ra...

Reviews: