Technology Module TM StepDrive 1x24..48V/5A
MA 1303-A007 EN
52
6.7.1 Parameter (DS128)
Introductory remarks
When the system is switched on, the configured parameters are transferred from the CPU
to the module via DS128. The parameters can be changed during operation by the user
program (see chap. 12).
The parameters are explained in chapter 6.5.
6.7.2 Causes of Parameter Setting Errors
Invalid combination of the functions of the digital inputs (two limit switches are as-
signed the same function)
Traversing range out of range of values
Invalid step resolution
Invalid current specification
Invalid frequency setting
See chap. 14.
6.7.3 Demo Project
A demo project with program blocks (valid from TIA Portal V15) is available for download
from the
