User Manual IXE
α−
A
MA 1206-A001 GB
30
4.1.3 Key Assignment / Switching the Functions
•
After powering the unit ON, the lower signs of the keys are activated.
•
The upper characters or signs are activated by pressing simultaneously
+
corresponding key.
•
The
key is used to switch from the capitals to normal characters.
•
In the
Manual mode
, the
key is used to switch the run frequency f/f’ :
f (f
min
): press the
key
f ‚(f
max
): press the
+
keys
If the cursor is not visible in the
Manual mode
, the
key can be only used to switch the
run frequency.
•
Pressing
starts the displayed instruction. The messages from the connected unit
must also be acknowledged with
.
•
The
key is used to go back to the
Manual mode
without executing the
instruction. The cursor disappears.
•
Function keys F1 to F4 are not used in the present program version.
Cursor control keys refer to chapter 2.1.1
