Phytec phyCORE-P87C591, Quick Start Instructions

Page: 29 / 84

Getting Started
© PHYTEC Meßtechnik GmbH 2002 L-586e_2
25
Sector Utilities
4
enable erasure and status check of individual sectors
of Flash memory specified by the user:
2.4.1 "Blinky"
The “Blinky” example downloads a program to the Flash that, when
executed, manipulates the LED D3 on the phyCORE Development
Board LD 5V that is located above the jumper field
(refer to Figure 2).
•
Returning to the FlashTools98 tabsheet, choose the Bank Utilities
tab, highlight Bank #1 within the Bank Erase section, and click on
the Erase Bank(s) button to erase this memory bank.
•
Wait until the status check in the lower left corner of the
FlashTools98 tabsheet finishes, returning the connection
properties description to the lower left corner of the window.
•
Next choose the File Download tab and click on the File Open
button.
4
: The appearance of the Sector Utilities tabsheet varies depending on the size and type of the
Flash mounted on the phyCORE-P87C591.