Quick
Start
Guide
•
• •
••••
•• ••••••
•••• •••••••
• •••• ••••••••••
•••
•
• •
•
•
•
•
••
•
•
••
••
•••
•
•••••
••
• •
•
•
•
•
•
•
•
•
•
•
•
••
•
•
•
•
• •
•
•
•
•
••
•
•
••
••
•••
•
•••••
••
• •
•
•
•
•
•
•
•
•
•
•
•
••
•
•
•
•
• •
••••
•• ••••••
•••• •••••••
• •••• ••••••••••
•••
•
• •
•
•
•
•
••
•
•
••
••
•••
•
•••••
••
• •
•
•
•
•
•
•
•
•
•
•
•
••
•
•
•
Germany
PHYTEC Messtechnik GmbH
Robert-Koch-Straße 39
D-55129 Mainz
Phone: +49 6131 9221-32
Fax: +49 6131 9221-33
www.phytec.de
www.phytec.eu
USA
PHYTEC America LLC
203 Parfitt Way SW
Bainbridge Island, WA 98110
Phone: +1 206 780-9047
Fax: +1 206 780-9135
www.phytec.com
France
PHYTEC France SARL
17, place Saint-Etienne
F-72140 Sillé-le-Guillaume
Phone: +33 2 43 29 22 33
Fax: +33 2 43 29 22 34
www.phytec.fr
India
PHYTEC Embedded Pvt. Ltd.
#16/9C, 3rd Main, 3rd Floor,
8th Block, Opp. Police Station
Koramangala, Bangalore-560095
Phone: +91-80-40867046/48
www.phytec.in
L-79
1e_3
China
PHYTEC Information Technology Co. Ltd.
Suite 2611, Floor 26, Anlian Plaza,
4018 Jin Tian Road, Futian District,
Shenzhen, CHINA 518026
Phone: +86-755-3395-5875
www.phytec.cn
phyBOARD
®
-
Wega AM335x
Get your phyBOARD
®
-Wega powered up and connected in just a few simple steps.
1) Preparing the Hardware
1.
Check the kit content (see overview on the right hand side).
2.
Have your connection cables at hand: You need an RS-232 cable (one-to-one) and a standard
Ethernet cable. Phytec offers an accessory kit which includes these cables.
3.
Power up the phyBOARD-Wega.
For the 24 V-kit version (A):
Connect the 2-pin PHOENIX
connector (included) to a 12 V-24 V (±10%) DC power supply.
For the 5 V-kit version (B):
Connect the 2-pin PHOENIX connector (included) to a 5 V (±5%)
DC power supply. In both cases please note the polarity of the connectors (see picture A/B)!
If you have bought the optional power supply with your kit, it comes already with the 2-pin connector wired.
4.
Turn your power supply on and plug the 2-pin PHOENIX connector into the green jack of your kit.
The Power LED
D58
will light up.
Please note: only the 24V-kit version
comes with the power adapter board.
Kit
Contents
Optional
Accessories
phyBOARD
®
-Wega AM335x
2-pin
Evaluation Module Power Module 12 V-24 V
PHOENIX
(PEB-EVAL-01)
(PEB-POW-01)
RS-232 and
HDMI Adapter
CAN Adapter
(PEB-AV-01)
Additional Equipment required
Power Adapter 5 V or 24 V RS-232 Cable Ethernet Cable Virtual Machine Hard Disk Image available from
www.phytec.de
or on
an optionally purchasable USB Flash Drive
12V-24V-kit version
A
5V-kit version
+
GND
B
+
GND