Phytec eGrabber-4plus, Hardware Manual

Page: 37 / 206

Delivery Contents / Technical Data

PHYTEC Meßtechnik GmbH 2004 L-608e_4
27
CPU-cards from the MOPS-series by Jumptec can be connected
directly with the power supply of the eGrabber-4plus. To facilitate
this, socket X303 (
ç
) is located at the same poition as the voltage
input of the MOPS-CPU-cards.
By using appropriate pin connectors, the supply voltage can be
delivered without connector cables, simply by linking the cards
together.
The socket X303 is designed especially to fit the aforementioned
CPU-card and delivers all required voltages.
For additional information refer to the handbook of the MOPS-CPU
card
Important:
Test exactly whether the pin-out of the supply voltage connector on
your CPU-card matches the pinout of socket X303 (see Table 11).
Pin Function
1 GND
2 +5 V
3 N.C.
4 +12 V
5 N.C.
6 N.C.
7 GND
8 +5 V
Table 11: Pinout of Socket X303