9
INSTALLATION
Please read all the following instructions before beginning installation. The
steps required to properly install the Contour Cinch
TM
Backrest must be followed
in the order that they are listed.
Required tool:
5mm Hex Key
ASSEMBLING THE MOUNTING PLATE AND UNIVERSAL CLAMP
The assembly of the mounting plates and the universal clamps will have been
done by our technicians before delivery. However, if reassembly is necessary,
please follow the instructions listed below:
1. Place section
B
of the universal clamp
underneath mounting plate
C
.
2. Place section
A
of the universal clamp over
mounting plate
C
.
3.
Align mounting holes of sections
B
and
A
of the universal clamp with the central
adjustment slots of mounting plate
C
.
4.
Insert 3 M
6
screws and tighten firmly
with a 5 mm hex key. Repeat these steps
for the second mounting plate.
October 20
22
Summary of Contents for Contour Cinch Backrest
Page 34: ...NOTES 34...
Page 35: ...NOTES 35 Octobre 2022...
