Physio Control LIFEPAK 20, Manual

Page: 52 / 227

3
M
o
nitoring
Monitoring
LIFEPAK 20e Defibrillator/Monitor Operating Instructions 3-3
©2006-2015 Physio-Control, Inc.
You can select or change the ECG size by using the
SIZE
button or the Speed Dial. If an ECG is
in Channel 2, the size is automatically changed to match the Channel 1 size.
To select or change the ECG size using the Speed Dial:
Adjusting the Systole Tone Volume
To adjust the systole tone volume, highlight and select heart rate (HR) in the monitoring area of
the screen.
The following overlay appears:
To select or change the ECG lead using
the Speed Dial:
1 Highlight and select
CHANNEL 1
, and
then select
LEAD
to obtain the
primary ECG lead choices.
2 Change the ECG lead by rotating the
Speed Dial. The highlighted selection
shows the ECG lead.
3 Repeat Step 1 and Step 2 to select or
change displayed waveforms for
Channel 2.
To select or change the ECG size using
the
SIZE
button:
1 Press the
SIZE
button.
2 When the Size menu appears, press
the
SIZE
button again. The
highlighted selection shows the
current ECG size.
1 To obtain the primary ECG, highlight
and select
CHANNEL 1
, and then
select
SIZE
.
2 Change ECG size by rotating the
Speed Dial. The highlighted selection
shows the current ECG size.
1 Rotate the Speed Dial to the desired
volume.
2 Press the home screen to exit.