Phynix DC-2000C, Instruction Manual, Page: 33 / 40

33
 press into 1. Measurement ,
 press or to select 4. Probe calibration ,
 press to confirm ,
 press or to adjust the displayed value and make it equal to
the actual thickness of workpiece,
 press to confirm ,
 press to get back to measurement.
Now the probe is calibrated.
17.4.5. Function
With this menu item you can set some properties of the gauge.
17.4.5.1. Switch off mode
 press into 1. Measurement ,
 press or to select 5. Function ,
 press to confirm ,
 press or to select 1. Switch off mode ,
 press to confirm ,
 press or to select the automatic switch off time: 1 minute , 3
minutes or 5 minutes ,
 press to confirm ,
 press to get back to measurement.