Section 3 - Advanced Configuration
UPNP Setup
The camera supports UPnP which is enabled by default. This function requires a
Windows XP/Vista operating system. It is a quick way to discover the camera on
your network. Please make sure that the UPnP function is enabled on your PC.
[UPnP]
Enable or disable the UPnP function.
Enable or disable this function.
[Gateway HTTP/RTSP port forwarding]
Using this port, automatically adds a port
[External HTTP/RTSP port range]
forwarding rule to a router via UPnP protocol. Please note that not all routers support
this function. Refer to your router manual for further details.
If set port range is 8150~8350, camera will ask router to add a port forwarding rule
automatically. In this rule, the internal port is camera default port 80, the external
port is 8150, IP address is camera's IP. Use this setting, users can visit the camera from
Internet through the router with this URL http://routeripaddress:8150.
If there are several cameras in Local Network, the first one which first be opened will
use 8150 as external port, and second one will use 8151, third one use 8152, etc.
Every camera will remember its port, it will preferentially
use this port in next power on.
PHYLINK Cube HD User Manual
57
