Photron FASTCAM Mini CX Series, Hardware Manual

Page: 29 / 66

15
FASTCAM Mini CX100
A.1
Ref
e
re
n
ce
I
n
fo
rm
ati
o
n
1.2.10.
Multipul I/O PORT connector
The input/output signal connectors on the system have been bundled into a single connector, the “I/O PORT”
connector, and it is possible to connect to and access each type of signal by using the specialized I/O cable. By
inputting an external trigger or synchronization signal or power on signal and by outputting exposure timing or
synchronization signal, these signals can be used as a part of the system.
A signal other than the specified signal must not be input to the various connectors.
Use extreme caution as there is a risk of damage to both devices, the input device and the output device.
• For signals that can be input, refer to “1.3 Input / Output Signal Types”.
I/O PORT
（
Body side)
EZG.2B.314.CLN
I/O Cable
（
Cable side)
FGG,2B.314.CLAD72Z