Photon Focus MV1-R1280-50 Series, User Manual, Page: 56 / 103

5 Functionality
Start pixel index Parameter width [bit] Parameter Description
0 32 Preamble: 0x55AA00FF
4 24 Image Counter (see Section 5.7.1)
8 32 Real Time Counter (see Section 5.7.1)
12 8 Missed Trigger Counter (see Section 5.7.1)
16 16 Image Average Value("raw" data without taking
in account gain settings) (see Section 5.7.1)
20 24 Integration Time in units of clock cycles (see
Table 4.3)
24 16 Reserved (Burst Trigger Number)
28 8 Missed Burst Trigger Counter
32 11 Horizontal start position of ROI (OffsetX)
36 11 Horizontal end position of ROI (= O
Width - 1)
40 11 Vertical start position of ROI (OffsetY). In
MROI-mode this parameter is the start position
of the first ROI.
44 11 Number of rows - 1 (HeightInterface - 1)
48 2 Trigger Source. 0: TriggerMode=Off; 1:
TriggerMode=On, TriggerSource=PLC_Q4; 2:
TriggerMode=On, TriggerSource=Line1; 3:
TriggerMode=On, TriggerSource=Software; 4:
TriggerMode=On, TriggerSource=ABTrigger.
52 2 Digital Gain
56 2 Digital Offset
60 16 Camera Type Code (see Table 5.6)
64 32 Camera Serial Number
68 32 Reserved
72 32 Custom value: value of register
StatusLineCustomValue that can be set by the
user
76 16 FineGain. This is fixed a point value in the
format: 4 digits integer value, 12 digits
fractional value.
80 24 Encoder Position (only available in some models,
see Appendix B).
84 32 Reserved
88 32 Reserved
92 4 Trigger Level: signal level of the trigger input
signal (only available in some models, see
Appendix B). Bit 0: PLC_Q4: Bit 1: Line1; Bit 2:
PLC_Q6 (A-Trigger); Bit 3: PLC_Q7 (B-Trigger).
Table 5.5: Assignment of status line fields
56 of 103 MAN066 12/2018 V1.1