All cleaning tanks should be handled with care to
ensure maximum performance. Please read this
user manual before using your
Air Wash cleaner:
• Ensure power is disconnected before attempting to
add or remove fluid.
• If pouring fluid away, pour away from the electrical
socket on the rear control panel.
• Do not let items rest on the bottom of the tank,
always use the basket and the bracket.
• When submerging parts ensure fluid is not
displaced out of the tank.
• Never change the fuse for a higher rated one.
• Do not use the product if it is in an unstable
condition i.e. susceptible to fire or explosion
We recommend keeping your Photocentric Air Wash
L away from the below conditions:
• High humidity
• Unpredictable fluctuating temperatures, too hot or
too cold conditions can affect the functionality and
lifespan of the machine.
• Non-stable surfaces
• Corrosive gases
• Loose chemicals, oils and water (not including the
cleaner currently being used)
• Where explosives or unstable chemicals are stored
1
Thank you for purchasing the Photocentric Air
Wash L, Please read all of this instruction ma-
nual to ensure you are operating this machine
correctly and safely.
If there is any damage to the wiring or machine
please do not connect it to the power supply, ins-
tead contact Photocentric on:
and a member of our team will get back to you.
Safety
warnings
Air Wash L
Air Wash L
Product & Accsories
Photocentric AirWash L unit includes the below
items:
• Basket
• Power cable
• Instruction manual
• Bracket
2
Product Operation –
Cautions
Please read and follow the guidelines provided whilst
operating this machine - if these are not adhered to,
they can cause damage to your machine and may
invalidate your warranty. Before starting the machine
ensure that:
• All buttons and switches are turned off
• Cleaner is present in the tank up to maximum level
• No liquid has splashed on the electronic parts of the
machine
• The power supply is earthed and grounded
• The machine is not moved whilst in use
Product Operation
Setting up AirWash L for the first time
Step 1
Open the lid. Lift out the print bed support bracket
and the basket. Please note that the basket has a
longer stand on the left-hand side to keep the basket
level in the tank.
Using Air Wash L
Step 1
Make sure the lid is left open before bringing the
platform to the Air Wash.
Step 2
Fill the tank with Photocentric Resin Cleaner to
maximum.
Step 2
Take the bracket to your LC Magna printer and
slide the bracket under the platform location plate.
Step 3
Try to centralise the bracket pin to middle of
platform.
Step 3
Plug the machine into the mains supply socket (do
not hard wire this machine into the mains supply
without a suitable cut-off switch)
Step 4
Place the basket inside the unit
MAXIMUM LEVEL
