System Screen Navigation
The following table shows navigation through the system screens.
Action
Current Screen
Button Down
Button Up
Button Click
Data Screen
Bandwidth Settings
-
Reset Max Knock
Reading
Bandwidth Settings
Gain Settings
Data Screen
Change Bandwidth
Settings
Gain Settings
Alert Settings
Bandwidth Settings
Change Gain Settings
Alert Settings
Restore Defaults
Gain Settings
Change Alert Settings
Restore Defaults
Quickstart Alert
Settings
Restore Default
Settings
Quickstart
Version Information
Restore
Defaults
Change Quickstart
Settings
Version Information
-
Quickstart
Settings
-
Warning: This product is for off road use only and should be installed by a qualified
Automotive Electrician.
This device should not be used as the sole method of knock detection whilst tuning an
engine. Incorrect configuration, electrical interference or poor electrical connections may
result in incorrect knock readings.
For Technical Support email: [email protected]
Warranties Statement
All products manufactured or distributed by Phormula Ltd are subject to the following, LIMITED EXPRESS
WARRANTIES, and no others:
For the period of one (1) year from and after the date of purchase of a new Phormula Ltd product, Phormula Ltd
warrants and guarantees that such a Phormula Ltd product shall be free from defects of materials and workmanship
in the manufacturing process. A Phormula Ltd product claimed to be defective must be returned to Phormula Ltd.
Phormula Ltd, at its sole option, shall replace the defective Phormula Ltd product with a comparable new Phormula
Ltd product or repair the defective Phormula Ltd product. This expressive warranty shall be inapplicable to any
Phormula Ltd product not properly installed and properly used by the purchaser – user or to any Phormula Ltd
product damaged or impaired due to external forces. This is the extent of warranties available on this Phormula Ltd
product. Phormula Ltd shall have no liability whatsoever for any indirect, special or consequential loss or damage
following from the use of any defective Phormula Ltd product or by reason of the failure of any Phormula Ltd product.
Phormula Ltd specifically disclaims all warranties, conditions and other terms implied by statute or common law to
the fullest extent permitted by law.
The programme in this Phormula Ltd product is licensed not sold. Phormula Ltd grants you a license for the
programme only in the country where you acquired the programme. You obtain no rights other than those granted
under this license. Under this license you may use the programme on only one Phormula Ltd product at any one
time. You are not permitted to transfer or copy this programme. You may terminate your license at any time.
Phormula Ltd may terminate your license if you fail to comply with the terms and conditions of this license. In either
event you must destroy your copies of the programme.
Introduction
Thank you for purchasing the KS-3 Knock Analyser. This manual provides fitting and usage
instructions. For technical support please email [email protected].
Installation Overview
Sensor Plug Assembly
KS-3 Knock Analyser
Box Contents:
•
Main Unit
•
Signal Cable
•
Mounting Pads
•
Knock Sensor Kit
•
12v Power Adapter
•
Instruction Manual
1.
Mount the Knock Sensor
2.
Assemble sensor plug
3.
Connect signal cable
4.
Connect the power cable
5.
Configure KS-3 settings
NOTE: The signal cable must be
connected observing polarity.
Use heat shrink tubing to cover
the sensor cable and rear plug
housing.
