WWW.PHONIC.COM
INSTALLATION
1. Unscrew the module cover (on the
top-right, while facing the rear of the
speaker) on the Performer speaker.
2. Slide the WM40 module into the sock-
et.
3. Use the provided screw to fasten
the WM40 module to the Performer
speaker.
4. Use sticky – tape to attach the 2 an-
tenna wires to the rear-inner wall of
the module slot, ensuring they do not
cross one another. This will allow for
greater quality of reception.
5. Replace the module cover.
IMPORTANT
Whenever using the WM40L or WM40R,
the included short pin should be inserted
into the unused wireless microphone
module slot to enable the wireless mod-
ule to be used.
SPECIFICATIONS
WM40-L and WM40-R
Type :
Single Channel Receiver
Preset Channels :
16 Channels
RF Frequency :
614.175~804.800 MHz (FCC)
614.175-864.800 MHz (CE)
Frequency Stability :
±0.005%
S/N Ratio :
>100 dB
RF Sensitivity :
-100 dBm
Image Rejection :
75 dB
T.H.D. :
<0.5% @ 1 kHz
LED Indicator :
Power On
AF Output Impedance :
600Ω Unbalanced
Squelch :
Pilot Tone & Noise Mute
Operation Voltage :
6 ~ 8 VDC, 500 mA
For more information, please consult the
WM Series User’s Manual.
WM40-L and WM40-R
Wireless Receivers For The Performer Speakers
