Phonic SupraCurve A6600, User Manual, Page: 5 / 12

PHONIC CORPORATION
Page 5
A6600 USER’S MANUAL
0
+12/+6
-12/-6
0
+12/+6
-12/-6
12.5K 16K 20K
A6
60
0
Su
pra
Cu
rve
1
0
+12/+6
-12/-6
0
+12/+6
-12/-6
FILTER
FILTER
1
2
C L I P 1 2 + 6 0 - 6 - 1 2 - 1 8 - 2 4
C L I P
1 2 + 6 0 - 6 - 1 2 - 1 8 - 2 4
-15 +15
dB
INPUT
0
-15 +15
dB
INPUT
0
EQ IN EQ IN
RANGE
12dB
6dB
20 25 31.5 40 50 63
EQ IN EQ IN
RANGE
12dB
6dB
3 2 4 6
5
7
FRONT PANEL DE SCRIPTION
FRONT PANEL DESCRIPTION
1 INPUT level control
The INPUT level control allows you to adjust the input
signal level (volume).
2 LEVEL METER with CLIP LED
The LEVEL METER provides instant monitoring of output
signal level. To avoid possible distortion, reduce the input
level if the CLIP LED lights up. For the LED to blink briefl y
during the loudest parts of your program is acceptable; if
it stays on for several seconds, however, distortion may
begin to occur.
3 LOW CUT FILTER
The LOW CUT FILTER allows high frequencies to pass
through unchanged while severely attenuating (cutting)
very low frequencies. Use this switch to protect your
audio system from damaging low-frequency transients
(loud thumps).
4 HIGH CUT FILTER
The HIGH CUT FILTER allows low frequencies to pass
through unchanged while effectively attenuating very
high frequencies.
5 EQ IN button
Depress this button to activate the A6600; it will light up
yellow. Release it to terminate all A6600 functions,
providing an immediate comparison between the original
sound and the sound as processed by the A6600.
6 EQ RANGE selector button
One benefit of using a graphic equalizer is that the
frequency sliders form a graphic depiction of the
frequency response curve you have set. When the
setting requirements are subtle, however, it may not be
easy to identify the curve. If you encounter this diffi culty,
depress the EQ RANGE selector switch to increase the
range of the level settings.
When depressed, the button will light up red and set the
range at 6dB. When released, the same button will light
up green and set the range at 12dB.
7 Illuminated frequency level slider
Moving the illuminated slider upward increases the
level of the related frequency; moving it downward
decreases the level of the related frequency.
The operations of channel 1 & channel 2 are exactly the same.