3
1. INTRODUCTION
The PPC 1100/ PPC 1200 Power Conditioner/Light Module is the perfect accessory to any equipment rack,
providing the working light to the rack and basic power protection essential to your equipment on the rack. Install
a PPC 1100/ PPC 1200 in the top slot of your rack, and the eight switched AC outlets on the rear panel will power
up all your equipment while its two slide-out light fixtures provide discreet, illumination of their controls in any dark
place. A dimmer control allows you to have the suitable lamp brightness. PPC 1200 has a digital line voltage
display for monitoring current voltage at a glance, while PPC 1100 doesn’ t.
PPC 1100 Features
z
Two slide out, swiveling rack lights with dimmer control
z
Eight accessory outlets in the rear, controlled by a front panel switch, widely spaced to allow for maximum use
of “ wall wart” plugs
z
15-amp rating with circuit breaker protection
z
Illuminated on-off switch
z
Separate switch for lamps
z
Seven feet heavy duty AC cord
z
An additional unswitched outlet on front panel
z
PPC 1100 available in 100V~120V and 220V~240V, depending on countries
PPC 1200 Features
z
Includes all PPC 1100 features, plus the following
z
Triple-mode varistor spike and surge protection
z
Improved RFI filtering with high attenuation multi-stage filter
z
Digital line voltage display for monitoring current voltage from 90V~150V for 120V version, 175V~285V for
230V version.
z
PPC 1200 available in 100V~120V and 220V~240V, depending on countries
2. INSTALLATION
2.1 RACK MOUNTING
The Power Conditioner/Light Module may be installed in a standard 19 inch equipment rack. It requires 1.75
inches of vertical rack space and secures to the rack cabinet with four rack mount screws and cup washers.
Normally PPC1100/1200 is installed at the top of rack for lighting equipment on the rack.
2.2 CONNECTORS
It provides eight accessory outlets in rear panel, controlled by front switch and an additional unswitched
outlet on the front panel.
