Phonic PCR2213, User Manual

Page: 18 / 29

17
4.2 REAR PANEL
Just like the front panel, the text above the input/output sockets are STEREO mode and the text below the
sockets are MONO mode. They are clearly marked to minimize mistakes.
19 19
19 19 19
. IN 1 / IN 2
The input sockets are standard XLR female type. Set in the signal to IN 1 in MONO mode. The IN 2 socket is
not effective in MONO mode.
20 20
20 20 20
.
These are phase invert buttons, the phase will be inverted as soon as the button is pressed.
21 21 21 21 21
. LOW 1 / LOW 2
These are the LOW outputs. In MONO mode, they become LOW and MID output.
22 22
22 22
22
. HIGH 1 / HIGH 2
These are the HIGH outputs. In MONO mode, HIGH 1 is not in used. HIGH 2 is the HIGH output.
23 23
23 23 23
. SUB
When set this switch to the left, the low portions of the 2 lows are summed. It will be disengaged automatically
when in MONO mode.
24 24
24 24 24
. STEREO/MONO
Slide to left for STEREO 2-way mode, and slide to right for MONO 3-way mode.
25 25 25 25 25
. POWER SW.
To turn the unit on and off. This switch is best located in the rear panel to avoid accidental tampered during
operation which endanger the whole speaker system.
26 26
26 26
26
. POWER SOCKET
Standard IEC socket for power connection. Check the voltage before connection.
27 27
27 27
27
. GROUND POINT
Chassis grounding point for properly grounding.