Phonic KA720, User Manual, Page: 8 / 13

8 KA720
28.. .Main.Output.Jacks
These binding-post terminals are for the addition of passive
speakers to the KA720. Users can connect standard
banana plugs to these terminals to get the final amplified
signal of the KA720. In addition to using banana plugs with
the included binding posts, users may also opt to use free-
wires to connect to the KA720. To do so, simply unscrew
the binding post, slide the wire into the small hole in the
binding post, and screw the binding post back in. Ensure
no wire is exposed after the connection is made.
28
Connecting.speakers
Binding Posts
29.. .Voltage.Selector
This switch allows users to adjust the KA720 to areas with
varying voltage levels. For example, in the United States,
the switch would be set to V, whereas in, say, England,
it would be set to 230V. Users should check local voltage
levels before operating this unit.
30.. .Power.Connector
This is for the addition of an AC power source to the KA720
unit.
29
30