Digitrack User's Manual
PHONIC CORPORATION
page 10
page 11
PHONIC CORPORATION
Digitrack User's Manual
APPLICATIONS
1) Recording audio on the computer from an analog source (mixer, tape
deck)
First, use the provided USB cable to connect Digitrack to a computer with an available
USB port. Then, locate the stereo RCA outputs of your mixer or tape deck. Use a stereo
RCA cable to connect the outputs of the device to the stereo RCA inputs on Digitrack.
Open the audio recording software on the computer. Increase the source output until it
reaches the desired level.
2) Recording audio on the computer from a digital source (DAT deck,
DVD player)
First, use the provided USB cable to connect Digitrack to a computer with an available
USB port. Then, locate the S/PDIF output on your DAT deck, DVD player or other
S/PDIF-enabled device. Use an RCA cable to connect the output of the device to the
S/PDIF input on Digitrack. Open the audio recording software on the computer.
Increase the source output until it reaches the desired level.
Note:
Using well shielded cables improves signal integrity and provides better
protection against unwanted noise.
3) Computer audio playback into analog equipment (mixer, tape deck)
First, use the provided USB cable to connect Digitrack to a computer with an available
USB port. Use a stereo RCA cable to connect the stereo RCA outputs on Digitrack to
the stereo RCA inputs on the analog equipment. You can monitor the signal using the
headphone jack and volume control on Digitrack.
4) Computer audio playback into a digital source (DAT deck)
First, use the provided USB cable to connect Digitrack to a computer with an available
USB port. Use an RCA cable to connect the S/PDIF output on Digitrack to the S/PDIF
input on the DAT deck, DVD player or other S/PDIF-enabled device. You can monitor
the signal using the headphone jack and volume control on Digitrack.
5) Using Digitrack to listen to computer audio
First, use the provided USB cable to connect Digitrack to a computer with an available
USB port. Plug the 1/8" mini stereo adapter on a pair of headphones or speakers into
the 1/8" mini stereo headphone jack on Digitrack. Open the audio playback software
on the computer. Adjust the headphone volume control on Digitrack until it reaches the
desired level.
