background image

 

 

4

 

/

 

8

 

 

 

„

  Testing the signal strength received from outdoor antenna mounted in site by 

mobile phone: 

„

 

Please select the top of building to install the outdoor antenna if total floors are less 

than 7 floors, and shall try your best to select places like balcony or platform lower 

than 7

th

 floor for outdoor antenna if the buildings are over 7 floors, because the 

mobile signals are clean at less than 7

th

 floor.   

„

  The mobile phone shall display full bar signals in location where the outdoor 

antenna is installed 

„

 

The phone calls or data transmission shall be smooth and stable by 3 times testing 

in location where the outdoor antenna is to be installed 

„

 

As shown from the above illustration, testing the signals from A to E, and select a 

best place that displays full bar signals to install the outdoor antenna. 

„

 

Selecting the installation direction of outdoor antenna. 

„

 

The outdoor antenna shall point to the direction of the tower, and it would be much 

better to keep line of sight. 

„

  Please select the opposite directions for outdoor antenna and indoor antenna. If 

outdoor and indoor antennas have to be installed in the same direction, please 

install them only after the signal quality is tested and the self-oscillation is avoided. 

If the directional antenna is selected, the main directional angle should point to the 

tower antenna. 

„

  If the performance is poor due to weak signals or poor phone call quality, please 

adjust the direction of outdoor antenna or change its position in order to obtain the 

best calling effect. 

„

  The wide band booster supports all mobile operators or different mobile systems, 

so please adjust the outdoor antenna direction to have balance between signals of 

different mobile operators or various mobile systems.   

„

 

Connect

 the outdoor antenna to the booster connector marked 

OUTDOOR 

with 10 

meters RG58 Coaxial cable with N male connector 

Important : Outdoor antenna installation ---Notes: 

„

  In order to avoid interference, please note that the outdoor antenna should be far 

away from the following objects of metal, high-voltage line, RF antenna and 

high-voltage transformer. 

„

  Booster is a two-way signal Booster. So proper isolation between outdoor antenna 

and indoor antenna is necessary in order to avoid self-oscillation.   

„

  The minimum distance between outdoor antenna and indoor antenna shall be more 

than 10 meters; again the direction of outdoor and indoor antennas shall be opposite. 

„

  As shown in the below illustration, the booster the downlink signal 

r

 from the tower 

Summary of Contents for PTE-P70









Reviews:

Related manuals for PTE-P70