Phonetics Sensaphone IMS-4000, User Manual

Page: 100 / 166

IMS-4000 Manual
100
Installation
This section provides information on:
n
Operating environment
n
Rack, wall, and tabletop installation
Parts Required
Phillips 9 pin F/F null Right-angle input
Screwdriver modem cable power cable (1 included)*
*For additional right-angle power input cables, order part # IMS-4413.
Operating Environment
Before you install the IMS-4302 PowerGate2 be sure that your operating environment meets the
physical requirements of the equipment.
Operating Temperature: 32º–122º Fahrenheit (0º–50º C)
Humidity:
5–90 %RH, non-condensing
Power: 120VAC 60 Hz outlet within 6'
Multiple 15A 120VAC outlets for powering equipment
Rack Requirements: Standard 19' equipment rack with supplied mounting bracket
hardware. Requires 1.0 EIA rack mount space.
Tabletop requirements: Flat area which can support an enclosure 17" wide by 10" deep by 2"
high.
Rack Mount Installation
The IMS-4302 PowerGate2 can be rack mounted using the included rack mount brackets. Follow
the steps below:
1) Attach the rack-mount brackets to the PowerGate2 with a Phillips screwdriver.
2) Attach the unit to the equipment rack using two pan-head screws per side. Tighten the
screws with a Phillips screwdriver.
3) Plug the power cord into a 120VAC outlet.
Figure 3: Rack-mounted PowerGate2 Unit