manualshive.com logo in svg

PhoneMate PM5805, Instruction Manual

Share
Download
PhoneMate PM5805 Instruction Manual Download Page 11

11

Resetting to default

You can reset the phone programming to the initial factory default settings. The
default settings are:

Language

English

Area Code

- - -

Ringer Tone

1

Tone/Pulse Setting

Tone

1. Make sure the phone is OFF (not in TALK mode).
2. Press 

FLASH/PROG

 repeatedly until “

DEFAULT       1 NO

” shows on screen.

3. Press 

CID

 

 or 

, or the 

1

 or 

2

 keys to select your choice between “1 NO”

and “2 YES” for Default Settings”

4. Press 

FLASH/PROG 

again to confirm.  You will hear a confirmation tone.

Receiving a call

When receiving an incoming call, the LED on the handset flashes, and the handset
will show caller information. *

* Note:  

A subscription is required from your local phone company to receive

Caller ID information on your phone.  See 

Caller ID Features

, page 16.

1. Press 

TALK 

to answer the call.

Note:

 If handset is in the base cradle, remove it from base before pressing

the 

TALK 

key.  Either handset 1 or handset 2 can answer the call at once.

(for PM5805)

2. Press 

TALK

 to end your call.

Note: 

If you replace the handset to the base cradle or charger cradle (for

PM5805), the handset automatically hangs up.

BASICS

PM5821manual 21mar.p65

2006/5/12, ¤U¤È 05:49

11

Summary of Contents for PM5805






































Reviews:

No comments

Brands by name

Popular brands

Load more brands