Phone Labs Cell Phone, User Manual

Page: 13 / 20

Speaker Volume
During a call using the Speaker, pressing the volume bar adjusts the Speaker volume.
Ringer Volume
When not on a call, pressing the volume bar adjusts the ringer volume. When the ringer is OFF, an icon
is displayed on the idle screen in place of the banner.
When a Dock-N-Talk accessory is plugged into the Enterprise accessory port, you can use the “Do Not
Disturb” to prevent extension telephones from ringing. Pressing the Volume Down key while the Ringer
is off puts the Enterprise in Do Not Disturb mode. When in Do Not Disturb mode, the Ringer OFF icon
is displayed on the idle screen in place of the banner.
Message Waiting Indicators
If you receive a text message or a new voice mail message on your cell phone while it is connected to the
Enterprise base unit, a Message Waiting prompt will appear on the LCD screen and the red LED at the
top of the phone will flash. Listening to the message from the Enterprise will cause the Message Waiting
indicator to turn off. Disconnecting your cell phone from the Enterprise will also cause the Message
Waiting indicators to be turned off. If the message is a text message, press the “Text Msg” soft key to
view the message.
Call Handling
Live Call Transfer
Placing a call from your cell phone:
If you wish to dial a call first from your cell phone while it is docked to the Enterprise telephone, you can
then immediately transfer the call on to the Enterprise telephone by picking up the handset or pressing the
Speaker key and press “##” to connect the call.
Transferring an active call from your cell phone to the Enterprise:
If you are on a call with your cell phone, you can transfer the call to the Enterprise. Connect the cell
phone to the Enterprise base unit during the call and you can continue the call on the Enterprise handset
or speakerphone. Some cell phones may require that you press ## to connect the call.
Transferring a call from the Enterprise to the cell phone:
You may also detach your cell phone from the Enterprise during a call and continue the call on your cell
phone at any time. If you are using the Bluetooth Module, you will need to disconnect it from the
Enterprise to transfer the call to the cell phone.
Voice Dialing
Press and hold the “#” key down on the dial pad to begin a voice activated call. After the tone, say the
name and the call will be connected. This feature works only with cellular handsets that support voice
dialing from remote devices.
Enterprise Telephone User Guide 10