3
www.usephoenix.com • [email protected]
Toll-Free 1-800-533-7533
CAUTION: this unit is capable of damaging door frames,
drywall, and other structures. Do not over tighten. Do not
lubricate.
Step 5
- Weights (not provided) or a second Quick Chamber
can be placed on the excess plastic sheeting at the
floor to reduce air leakage. In applications this will not
be necessary, a single Quick Chamber (no weights) will
accomplish significant grain isolation.
3.2 Openings 48 inches to 73 inches
Extender Bar Accessory
If you need to install the Phoenix Quick Chamber into an
opening wider than 48” the Extender Bar must be used.
Prior to Step the Phoenix Quick Chamber needs to be
prepared in the following manner:
Depress
Figure 5: Separating Quick Chamber
Figure 6: Preparing to insert Extender Bar into Quick Chamber
Figure 7: Extended Quick Chamber
Figure 4: Opening Extender Bar
Use
Storage
Use both adjustment levers to extend to the appropriate
length, and lock in place.
Depress the Quick Chamber adjustment lever and
separate the two parts of the Quick Chamber.
WARNING: Never lubricate pump mechanism. A lubricated
mechanism cannot hold itself in place reliably. Injury may
occur. A complete rebuild is required to return a lubricated
Quick Chamber’s functionality.
4 Maintenance
4.1 Pads
Keep pads clean, wash down with soapy water and dry.
4.2 Pump Mechanism
The pump mechanism can be cleaned with rubbing alcohol
and clean compressed air.
Insert the Extender Bar between the two halves of the Quick Chamber.
Attach the Quick Chamber Extender Bar as
described in Step by depressing the domed snap
button on the Extender Bar assembly and slide
from storage position to use position.
