PHOENIX LTC
|
3730 East Southern Avenue, Phoenix, Arizona 85040-3958
PHOENIXLTC.COM
1. Locate the pre-drilled holes on
the kiosk and line up with the
pre-drilled holes on the back
cover. Make sure all of the new
cabling is under the cover.
Secure into place with spanner
screws and screwdriver.
2. Mount the back tablet weldment
into place, pull the HARNESS,
TERMINAL MALE CABLE and
CABLE USB 3.0 3 HUB W/ GBE
ADAPTER through the opening on
the back tablet weldment. Secure
with KEPS NUTS.
3. Take the two cables and pull to
the side so they hang off the right
hand side.
Installing the Lenovo Tablet