Phoenix RPC12 Series, Cli Reference Manual

Page: 27 / 245

28 Phoenix RPC12 Series CLI Reference Manual • September 2008
Viewing Command Help
To view brief descriptions of all commands that are available to the user level you
logged in as, type:
To view help for a specific command, type either:
To view information about the syntax to use for specifying disk drives, virtual disks,
volumes, and volume mapping, type:
Size of Devices and Logical Units
The size of disk drives and logical units such as virtual disks and volumes are
presented in base 2 (binary) format, not base 10 (decimal) format. Table 1-1 shows
how sizes are presented in each format.
To check which format is being used, use “show cli-parameters” on page 146. To
change the output format, use “set cli-parameters” on page 106.
#
help
#
help
command
#
command
?
#
help syntax
Table 1-1 Sizes in Binary and Decimal
Unit Size in Binary Size in Decimal
Kbyte 1024 bytes 1000 bytes
Mbyte 1024 Kbyte
1,048,576 bytes
1000 Kbyte
1 million bytes
Gbyte 1024 Mbyte
1,073,741,824 bytes 1000 Mbyte
1 billion bytes
Tbyte 1024 Gbyte
1,099,511,627,776 bytes 1000 Gbyte
1 trillion bytes